Perotec Systems is the exclusive representative of JSW, Tool-Temp, Plastic Systems, S.I.S.E., Star Automation and Asaclean for Serbia, Croatia, Bosnia and Herzegovina, Macedonia and Montenegro. We supply, commission and service injection molding machines and auxiliary equipment.
All-electric JSW machines with servo motors and absolute encoders — CNC-level accuracy to 0.01 mm, stable processing and high energy efficiency.
Process temperature control with water or oil for plastics, rubber, metal casting, printing, chemical, pharma and food industries.
Standard cooling solutions tailored to process requirements: air-cooled and water-cooled chillers and free cooling for stable production.
Granulate drying and gravimetric dosing for injection molding, extrusion and other plastic processing lines.
Hot runner regulation and sequential valve-gate control from 1 to 199 zones.
Star Automation cartesian robots for part removal and handling — shorter cycles and more consistent quality.
Asaclean purging compounds cut color and material changeover time and reduce scrap on molding and extrusion machines.
Plastic Systems silos, containers and granulate conveying — reliable supply from storage to the machine.
Automotive parts demand tight tolerances, consistent cycle times and high-volume repeatability, whether the part is a large technical component or a small precision connector.
Food industry processing — from packaging to processing equipment components — needs reliable temperature control and consistent material handling to meet hygiene and quality requirements.
Medical and pharmaceutical parts demand precision, repeatability and clean, low-contamination production — small tolerances and consistent quality matter more than in almost any other application.
Packaging production runs on speed and consistency — thin-wall parts need fast cycles, accurate material dosing and reliable high-volume handling.
Rubber processing — molding and extrusion — needs precise temperature control to manage cure times and maintain material consistency across production runs.
Wood processing — laminating, pressing and related thermal processes — depends on precise, stable temperature control to protect material quality and process consistency.
Capacity chosen for your material, process, throughput and cycle time — so the investment matches the real needs of the plant.
On-site installation, process setup and operator training.
Service, diagnostics and original spare parts throughout the equipment lifecycle in the markets we cover.
Injection molding, extrusion, drying, dosing, conveying, temperature control and automation — modular upgrades with measurable payback.
All-electric injection molding machines, from 30 to 3000 tons.
Swiss temperature control units and process thermostats, water and oil up to 360°C.
Granulate dryers, gravimetric dosing units and material conveying.
French hot runner controllers and MES production monitoring.
Cartesian robots for injection molding automation.
Japanese purging compounds for machine cleaning.
Unstable mold temperature — swings cycle to cycle, or uneven temperature between zones of the same mold — usually comes from one of four causes: insufficient flow of the temperature-control fluid (water or oil), a faulty or poorly positioned temperature sensor, poor mold channel design, or a problem...
MORE DETAILSWhen a chiller can't reach its water setpoint, the cause is usually one of four: cooling capacity is insufficient for the plant's actual heat load, the condenser is dirty so the compressor runs at reduced efficiency, refrigerant charge is low due to a leak, or water flow through the system is insuff...
MORE DETAILSA high dew point means the dryer isn't delivering air dry enough to pull moisture out of a hygroscopic resin (PET, PA, PC and similar materials), which directly causes hydrolysis, bubbles and streaking in the finished part. The most common causes are a saturated or damaged molecular sieve, an air le...
MORE DETAILSInjection molding machines and auxiliary equipment: temperature control units, industrial chillers, granulate dryers and dosing units, hot runner controllers, robots and purging compounds — from JSW, Tool-Temp, Plastic Systems, S.I.S.E., Star Automation and Asaclean.
Serbia, Croatia, Bosnia and Herzegovina, Macedonia and Montenegro. For every brand we provide supply, commissioning, spare parts and technical support.
Yes. Perotec Systems covers the whole equipment lifecycle — sizing and selection for your process, delivery, installation and commissioning, operator training, plus service and original spare parts throughout operation.
Lead time depends on the model and availability — typically several weeks to a few months for injection molding machines, shorter for auxiliary equipment. Perotec Systems coordinates delivery, installation, commissioning and operator training at your site across Serbia, Croatia, Bosnia and Herzegovina, Macedonia and Montenegro.
